Click In Grin

The Click-In Grin

Finally! A Way You can Eliminate the Dentist and Save yourself Hundreds of Dollars by dealing Directly with the Dental Lab!

Dental Lab Direct announces that Removable Veneers are now available OVER THE INTERNET for $498, for individuals that want a Hollywood Smile. BUY CLICK IN GRIN HERE

The Click-In Grin / REMOVABLE VENEER

Veneer

Watch the video on how to make your own impressions! 

THIS VIDEO CLIP WILL SHOW YOU HOW:

- The Veneer isn't designed to chew food...The flexible framework (Removable Partial Dentures) RPD's are
The most recent advance in dental materials has been the application of nylon-like materials to the fabrication of dental appliances. Nylon generally replaces the metal, and the pink acrylic denture material used to build the framework for standard removable partial dentures. Nylon is similar to the material used to build those fluorescent orange traffic cones you sometimes see on highways. It is nearly unbreakable, is colored pink like the gums, can be built quite thin, and can form not only the denture base, but the clasps as well. Since the clasps are built to curl around the necks of the teeth, they are practically indistinguishable from the gums that normally surround the teeth. Brands of this type are: Luciton FRS, Sunflex, TCS, Duraflex, Valplast, and Flexstar.

Monday, July 26, 2010 11:27 AM

"I had lost three front teeth in a accident just weeks before my daughters wedding. This was to be a large formal wedding and giving away my daughter with three missing front teeth was out of the question. I went to my dentist and he told me that he could not have a temporary bridge ready before the wedding and the cost for a "temperary bridge" was extremely high. I fortunately found neon brite and contacted Rob. I was skeptical and had a lot of questions but Rob assured my that they could do it and in time for the wedding. What amazed me was that every time I emailed Rob width a question he got back to me almost immediately. Well, long story short, he came through. The flipper arrived before the wedding as promised and it looked great. My wife stood inches from me and said you could never tell they were not my own teeth. Thankyou again Rob best to you.

Bob Sincerely,
Robert Taylor., London OH

BUY CLICK IN GRIN HERE

The appliance is manufactured from an incredible polymer that almost appears ceramic...it's made after you return the impression you make of your own teeth where a plaster cast is made. The cast is then used to manufacture the Veneer with tooth color selected (shown below) . The polymers will be molded to fit inside the tongue. In most cases it is one (1) of the first three (3) shades...A1, A2, or A3. If unsure, choose the lighter shade and purchase some tooth whitener for your opposing arch:

Dentin

BUY WHITENING GEL HERE

Even if the appliance is meant to be used on temporary basis, certain people may choose to have it semi-permanently. Since they press on the gums it is not the best option as far as you want to take care of your healthy teeth and gums.

This appliance, from a qualified cosmetic dentist, can cost up to $2500! Many people don't care to pay that amount for something temporary, which is why ours is only $498/per Arch FOR THE SAME EXACT THING!...many wait until they can get a permanent solution. However if the tooth missing is where it can affect your smile and your appearance; you can part with the money. Aside of the appearance, sometimes a missing teeth can also create discomfort, which means: you need to get this or something quick.

In extreme cases...this is what we can do for you if you provide us a PROPER impression of your teeth:

Removable Veneer


Personal Stories: Dental Bridges

I turned forty last year, and have enjoyed playing softball since I was a kid. One drawback to the sport is the occasional hit from a ball. Several years ago I lost two teeth from such a mishap, and had worn a partial. I found the partial to be a bit embarrassing at my age, but my dentist had discussed no other option with me.

Frustrated that I was stuck with this thing for the rest of my life, I started doing some research, which was hard to come by. And when I did discover information on alternatives, I didn't understand it. As many of you who are now visiting this site already know, such matters are not easy to speak with family or friends about. After visiting this site, I soon understood that I had a few options to remedy the spaces in my mouth.

I located a Certified Cosmetic Dentist and discussed these options, including the fact that I wanted to avoid the more costly procedures, such as implants. His immediate solution was placing two bridges.

Because it takes time to get the bridgework complete I used a flipper in the interim. Rob, thanks for the site!

Jerry B., New Hampshire

BUY CLICK IN GRIN HERE

Here's how it works:

When you receive your kit, WATCH THE VIDEO first. Then take out a set of the YELLOW & BLUE impression material (putty).

a

Mix the two pieces of putty together for 45-65 seconds just to get one solid BLUE color (warmer areas may set faster)

a

When your putty is one solid color, roll it & shape it like a finger.  Pick up your tray.

a

Put the finger shaped putty into the tray, making sure to cover all parts of the tray.

a

Take the tray and place it over the center of your upper or lower teeth (REMEMBER: this putty will begin to harden in under TWO (2) minutes). Push the tray over your teeth. Hold for five minutes, then remove.

a

 Send your impressions back to our dental lab using the pre-paid envelope that came with your kit. We make your custom mouthpiece(s) & mail it back to you, EASY!

BUY CLICK IN GRIN HERE

Determining the color for your appliance?

When considering partial dentures a common question is how white the tooth should be. Usually, the answer is to whiten your natural teeth to either the level of whiteness you want or to the brightest they can be. Your cosmetic dentist will then have the dental bridge made to that color. Teeth are of course not monochromatic, so typically more than one color is used to create a very natural look. This color variation is critical in avoiding fake or artificial looking teeth. It is the internal contrast of colors that help create vitality. The internal play of light on the porcelain in the restoration helps to create this vitality. Surface texture is also very important, and helps to break up light reflections and make the dental bridge look more natural. Depending on the type of dental bridge you're considering, it's important that the crowns anchoring the bridge match both the dental bridge and the color of your natural teeth.

There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:

A (reddish brown)

B (reddish yellow)

C (gray)

D (reddish gray).

In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

a

Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural.

Most dentists will show you a shade chart (like the above mentioned Vita Shade Guide) for you to pick from. Keep in mind, with a good cosmetic dentist this is merely a starting point. Other considerations when determining the color of dental bridges for each patient are your complexion, hair color, the color of your natural teeth and even your eye color.

BUY CLICK IN GRIN HERE

Dental-Lab-Direct™ Whitening Trays

Our Professional Tooth Whitening System consists of customized whitening trays (made of a thin flexible plastic to fit your teeth exclusively) and three (3) syringes of 22% tooth whitener Carbamide Peroxide tooth whitening-gel.  We construct the whitening trays from the impression trays and putty contained in our “kit”, that you make and ship back to our lab.

a

Upon receiving your Custom Professional Tooth Whitening Trays, a very small amount of tooth whitening gel from a pre-loaded gel-syringe are placed into them, and then placed over teeth.  The trays are worn for thirty minutes to an hour, depending on sensitivity.

Trays are worn for the first 5 days, then twice a week to maintain desired tooth whitening.  Compare ours versus the dentists versus the OTC (over the counter) type.  You’ll easily see the value of Neon Brite’s products and services.

The uses of Custom Professional Tooth Whitening trays are by far the most comfortable.  The trays are form fitted, not bulky like the type one boils.  They stay in place unlike whitening strips, can be worn anytime, not specifically at night and provide for a more even whitening of your teeth.

Our Tooth Whitening Gel is a 22% tooth whitener Carbamide Peroxide.  The boil, strip, & applicator type is only 3-4 % and must be worn much, much longer for the same desired effect.

BUY TEETH WHITENING TRAYS HERE


UNTIL RECENTLY, customized dental appliances were available to the public only through your dentist.  This was largely due to the level of skill in taking one’s teeth impression, the impression required to cast a mold and form customized tooth whitening trays.  Most dentists send teeth IMPRESSION  trays to dental labs to be cast and molded, & finally customized into form fitting trays delivered back to the patient a few days later.  Typically, the cost for upper & lower whitening trays range between $300.00 and $800.00!

Today, with the advent of our Personal Impression Kit, it’s possible to take one’s own teeth impression with detailed step by step photo instructions, usually taking less than fifteen minutes for both the upper and lower teeth.  Our kit along with your impressions are then sent via a Postage Paid Envelope to our lab…the same lab local dentists use, yet costing 60-90% less by “skipping” the dentist…eliminating the need for a D.D.S. to fit a professional dental mouthpiece.

Dental Mouthpiece